Tiki Central / Tiki Carving / Questions on stripping and restoration of Witco-like works
Post #104567 by chisel slinger on Tue, Jul 27, 2004 7:10 PM
CS
chisel slinger
Posted
posted
on
Tue, Jul 27, 2004 7:10 PM
a propane torch is'nt very expensive, maybe around $15 for a tank of gas and nossel. if you try burning, hold the flame about 6" away burn lightly up and down. dont hold it on one spot too long. go over it until the paint starts to turn brown and bubble.have a spray bottle of water near in case it starts to ember. i've burnt paint off some of my own pieces. but it looks like the stripper worked good.get a wire brush after the burning and brush the piece going with the grain.good luck, jimmy |