Post #214009 by Howland on Sat, Feb 11, 2006 9:02 AM

Thanks for all the positve feedback guys. Been kinda' pokin' at it slowly -damn work schedule gets in the way occasionally, not to mention a good case of the lower back blues.

Benzart---the chain doesn't come off the disk on the one I posted earlier, however, I started to sharpen it while still on the disk and it's working out OK-would be easier if I could remove it. I bought a new disk yesterday anyway (chain is removable on this one)-figured it wouldn't hurt to have a backup disk.

JohnnyP----the disk in that picture is a 'Toolbox' model I got back around 1998 or 99. The disk I picked up yesterday is a 'Lancelot' . The 'Toolbox' has a solid metal disk with a groove around the edge that the blade sits in. Also the chain spins freely around the disk whereas the 'Lancelot' is 2 metal disk halves that lock down over the chain when tightened onto the arbor/shaft. Jeez-I hope that made sense-feel like I'm rambling w/ my fingertips.

It's cold and wet outside-might take a day or 2 off. Winter finally showed up down here in the sunny south and I aint diggin' it!