Post #29223 by Basement Kahuna on Thu, Apr 3, 2003 3:10 PM

Cutting in the chest and arms. Getting the chest contours right is pretty hard on a Marquesan this size...the geometric features should sort of "flow" into the more organic ones. I use a single cardboard template for each feature so it will be the same on both sides. The red marks on the straight chisel shown are for different plunge depths. This is a chisel I use all the time that I have ground down the first 1 1/2 inches of the tip on a bench grinder to about 1/16th of an inch thin, tapered like a duckbill, which allows me to cut guide grooves quite deep without cracking the wood. It makes the work go faster because you usually don't have to plunge grooves twice. The ear protectors keep my rather Roger-Miller-like rock band induced tinnitus from getting worse from all that hammering. One may also note that I changed the design a bit to better porportion the arms.

[ Edited by: Basement Kahuna on 2003-04-03 15:12 ]