Post #306366 by Monkeyman on Mon, May 14, 2007 8:46 PM

Ok

Each participant will receive a kit that will contain the following:

Qty Item
2 - 6" wooden rings (for the ends of the lamp)
2 -9" wooden rings (for the middle of the lamp)
2 -wire nuts for the wiring
1 -twin light socket with pull chain
1 -10 ft 18 gauge cord/plug
1 -4 inch bracket bar (to hold the socket in place)
1 -top nut and washer
2 -Eye Hooks (to hang it by)
2 -Cheapo Paint Brushes (to brush on the modge podge)
5 -1/4" x 1/4" x 34" poplar ribs (to create the bend)
1 -Piece of Chip Board (thin cardboard)
1 -3 foot by 4 foot peice of real tapa cloth
8 -feet of seagrass braid
4 -hot glue sticks
25 - wire brads
2 -low wattage bulbs
-Electrical Tape

I will do some of the prep so that you can get the whole thing done in one day.

You will get all of this plus some lunch and some drinks and some comradery and some instruction and some music and some fun....

But best of all.... when you get home..... its READY to hang.

6 of the 15 spots are filled....

Dont be shy... I wont bite

[ Edited by: Monkeyman 2007-05-16 13:13 ]