Welcome to the Tiki Central 2.0 Beta. Read the announcement
Celebrating classic and modern Polynesian Pop

Tiki Central / Other Crafts / TIKISKIP : How to make tiki light, Lamp 101

Post #592243 by tikiskip on Sat, Jun 4, 2011 12:53 PM

You are viewing a single post. Click here to view the post in context.
T

You are going to take the round paper piece and place it in
the bottom of the basket, keep cuting it down till you have about
1/4 of an inch too much on sides.
Now cut 1/4 of an inch into the paper, now bend that up 90 degrees.
Put gule on botton of basket and on the ends of the paper.
next do the side the same way, keep puting the paper piece in the basket
and eyeing it make sure the bottom part of the side paper has no gaps.
Cut the 90 degrees into the side paper.
It is best to put the paper in the basket all at once.
Don't let some dry, then go back to it as you may need to lift the paper
and reajust many times.
You can't do this if it's dry.