Wendy Cevola - New colors of the Frank mug by Frankoma now available. - Other Crafts

D danlovestikis Grand Member (8 years) Joined: Jun 17, 2002 Posts: 9082	D danlovestikis Posted posted on Wed, Apr 30, 2014 8:40 PM littlegiles isn't it fun to have a glaze that cracks. I liked putting it on a mug that was similar to Greek statues. TikiAno Tiki Hula picked all his glazes for his AL DEAD bowl and did a great job. To re-glaze a piece I never know what color it will change to but darker always trumps lighter. When I re-glaze and area that had the glaze pop off then I rub it with a wet wash cloth to make sure all the dust is gone then I do it again. Also I always fire on the 13.5 hour slowest ramp plus I preheat for hours too if I'm unsure whether or not they have completely dried. TikiHula I'm looking forward to using the pin stripping paint on your AL DEAD bowl this weekend. I hope that works out. I so glad you like your Zombie Village mug. DooWop I am so happy that you liked the last post because I know you'll like this one even better because here comes your mug... ============================================================================================ This is the last load for Wish List #4. Here's the kiln unloaded. Tomorrow I will put up photos of the Wish List items that I took using black velvet and the MadDogMike studio. Top shelf of the kiln. First out was dartharnies dad's NY Yankee's mug. The black of the letters ran into the white a bit so I used enamel to fine tune the logo and then the next day I baked it. The flame for the crackled blue mug looked good so into a black dye this time. It also worked to color the cracks. Tiki Wahini your Rat Fink in Disneyland came out just fine without any glazing imperfections. More photos tomorrow. I had room to fill in the kiln so I glazed one of Dan's wishes. The glaze didn't function as well as I wanted it too but he was happy with this one and has already hung it on a wall. hang10tiki in the end I'm super happy with how your prize mug came out. The darker glaze looks so much richer. I added a few spots on the hands before this last firing and it made it better. This second test on the same first mug for the Sacramento Crawl mug shows that the black lettering works well. The tiki doesn't stand out enough using the same glaze as the coconut so I'll be doing more tests until I get it just right. Backside. DooWop your mug is done. It doesn't show it here but the creature does have green highlights. Better photos tomorrow. The bottom shelf with only the AL DEAD bowl left. He took it out and took a look and all the glaze has stayed on. That means it's the fourth time that is the charm. WISH LIST #4 IS OFFICIALLY FINISHED. I will soon send everyone an invoice with the cost of the project. Once you write back that your Wish was fulfilled I will find out the cost for shipping and send you an invoice. If you are not satisfied you do not have to accept what I have made. I had a blast making each piece and I look forward to the next Wish List near the end of the year. Cheers, Wendy

littlegiles isn't it fun to have a glaze that cracks. I liked putting it on a mug that was similar to Greek statues.

TikiAno Tiki Hula picked all his glazes for his AL DEAD bowl and did a great job.

To re-glaze a piece I never know what color it will change to but darker always trumps lighter. When I re-glaze and area that had the glaze pop off then I rub it with a wet wash cloth to make sure all the dust is gone then I do it again.

Also I always fire on the 13.5 hour slowest ramp plus I preheat for hours too if I'm unsure whether or not they have completely dried.

TikiHula I'm looking forward to using the pin stripping paint on your AL DEAD bowl this weekend. I hope that works out.
I so glad you like your Zombie Village mug.

DooWop I am so happy that you liked the last post because I know you'll like this one even better because here comes your mug...

============================================================================================

This is the last load for Wish List #4.

Here's the kiln unloaded. Tomorrow I will put up photos of the Wish List items that I took using black velvet and the MadDogMike studio.

Top shelf of the kiln.

First out was dartharnies dad's NY Yankee's mug.

The black of the letters ran into the white a bit so I used enamel to fine tune the logo and then the next day I baked it.

The flame for the crackled blue mug looked good so

into a black dye this time. It also worked to color the cracks.

Tiki Wahini your Rat Fink in Disneyland came out just fine without any glazing imperfections. More photos tomorrow.

I had room to fill in the kiln so I glazed one of Dan's wishes. The glaze didn't function as well as I wanted it too but he was happy with this one and has already hung it on a wall.

hang10tiki in the end I'm super happy with how your prize mug came out. The darker glaze looks so much richer. I added a few spots on the hands before this last firing and it made it better.

This second test on the same first mug for the Sacramento Crawl mug shows that the black lettering works well. The tiki doesn't stand out enough using the same glaze as the coconut so I'll be doing more tests until I get it just right.

Backside.

DooWop your mug is done. It doesn't show it here but the creature does have green highlights. Better photos tomorrow.

The bottom shelf with only the AL DEAD bowl left.

He took it out and took a look and

all the glaze has stayed on. That means it's the fourth time that is the charm.

WISH LIST #4 IS OFFICIALLY FINISHED.

I will soon send everyone an invoice with the cost of the project. Once you write back that your Wish was fulfilled I will find out the cost for shipping and send you an invoice. If you are not satisfied you do not have to accept what I have made.

I had a blast making each piece and I look forward to the next Wish List near the end of the year.

Cheers, Wendy

Post #715441 by danlovestikis on Wed, Apr 30, 2014 8:40 PM