Post #741557 by danlovestikis on Tue, Apr 21, 2015 7:47 AM

Holler Waller it's melting...when it goes into the kiln.

TheBigT thank you. Tiki Vato is out having fun. I hope he sees his tiki Bob soon.

Tyber Tiki the colors are as close to the book cover as I could find. We'll see when it comes out. Your lamp has been glazed but I just did two layers. If it's not dark enough I'll add more and fire it again. I don't want all the carving filled up with so much glaze that it's hidden.

===================================

Wish List #5 progress report

My work space had filled up with glaze jars from all the projects so I took time to haul it back to the kiln shed and to organize it again.

Tyber Tiki's Maori Lamp one of a kind is up for glazing. He decided on a dark brown that highlights the carving.

I started with the bottom.

Just for fun I ran some glaze over the carving just to see what it looked like.

Enough fun now I covered it with the first layer and when that dried

I put on a second layer.

All done and put with those waiting to glaze.

I did two layers. If this wasn't enough I can add one more. You can always add more glaze but you can't remove it.

========================================

LoriLovesTiki's mug says Jeff Loves Lori on the back.

==========================================

Professor G's Palm covered fogcutter mugs have had another layer of glaze added since the first firing.
I've started Professor G's small Maori Peanut Bob, photos soon.

===========================================

Here's the rest of the Wish List except for

Dan's wishes and all the mugs I've made on spec. Still covered here.

I'm not starting Dan's until everyone has their Wishes fulfilled. Cheers, Wendy

[ Edited by: danlovestikis 2015-04-21 07:48 ]