Welcome to the Tiki Central 2.0 Beta. Read the announcement
Celebrating classic and modern Polynesian Pop

Tiki Central / Other Crafts / Wendy Cevola - New colors of the Frank mug by Frankoma now available.

Post #748441 by danlovestikis on Sun, Aug 2, 2015 9:05 AM

You are viewing a single post. Click here to view the post in context.

Biotron2000 thank you. Yesterday and today I am able to walk fine. I just can't bend forward. I'm still working with Dan's help so I'm on schedule with the crawl mugs.

hang10tiki what I said to Biotron2000!

kingstiedye Tiki Central gets my posts first and then later on I do facebook. This is my home.

TikiAno when you have a new little boy to play with there isn't much time for art. He's worth it. I'm happy you check in and let us know what's up. The photo on the Swap page is adorable.

==============================

Update on the Sacramento Tiki Crawl mug. Every year I make 50 mugs and 40 sell and the last 10 go slowly over time. This year I made 60 and I only have 1 left and the crawl isn't until October! You'll see on this page that I'm making four more in different colors. If I run out at the crawl I'll have these as backups. I will destroy the mold when 100 have been made. The crawl run of 60 will not have their colors repeated.

After scrubbing off the glaze on areas to be glazed in colors I re-glazed all the caramel areas. Tiki, Palm Trunks and Bali Hai.
35 mugs ready for the next step after I eat my breakfast.

Next I did the bird and the flowers. I use shot glasses to hold the glaze for each color and a paint brush for each also.

I did 6 at a time and then Dan would swap trays for me and I would continue.

This part took 6 hours and I finished all the colors on 35 mugs.

This photo shows areas that lost glaze, in areas that need it, when I washed off the areas that needed color.

The next day when all the birds and flowers were dry I started adding background color to fine tune and to cover the accidentally washed off areas.

Even thought I go over each mug there may be areas that are thin and show up after firing. I will have to do more to those mugs.

More spots covered.

On 8/1/15 I have fired a load. Bottom shelf and

top shelf.

I can do 22 mugs and these had to wait. Tomorrow I'll be glazing them.

When I cast mugs I cast 64 in case any cracked when fired. None did and it left me with four extras. I am glazing them

in different colors as backups in case I run out at the crawl. 58 are already assigned. The mold mold will be destroyed when 100 have been made. 60 in the crawl colors.

I keep repeating this information so that there will be no misunderstandings. Thank you for the visit and comments.

I'm so happy to be near the end of glazing. Cheers, Wendy


[ Edited by: danlovestikis 2015-08-02 10:13 ]