Post #759704 by danlovestikis on Thu, Feb 25, 2016 8:53 PM

TikiAno it's been a long time since you posted Tiki Ari photos. Don't forget to do that for us.
If only it were just one layer per color life would be so much better. You do know from experience.

JenTiki Thank you.
(Can you put me on the list for the next batch? I'll want a bit of customization too.)
I've started a binder for Wish List #7 so when you have the ideas ready you may send them to me to save.

hang10tiki it's so wonderful that you are able to make a video. It looks very professional.

ebtiki thank you, it's fun to know that even when there are no comments the work of posting is worth it.

======================

Wish List #6 update. The Hot Tub Hula Girl mugs are about to get a whole lot hotter. They were dry and ready to fire.

First I looked for shelf supports that were tall enough.

Then I loaded the bottom shelf with the mugs. I stuck my camera underneath the shelf to check to make sure none of the heads were touching the shelf.

Well one of the mugs was taller. Since these are all assembled by me they are all different.

So I got little inch thick bricks to raise the shelf.

I then loaded the second shelf using the inch thick supports and I put down the third shelf.

I checked with a mug and found that I could put in any more mugs. So the total for this load was 16 of the 30.

So now I have a shelf that needs something on it before I fire. I need to see if there are any short wishes.

Cheers, Wendy