Post #777002 by danlovestikis on Fri, Jun 16, 2017 7:36 AM

Continuing to work on the Sacramento Crawl mug for October 2017.

These photos were taken from 3/14/17 to 3/26/17.

The grey glaze on all the mugs dried and now I took each mug and putting the sprayer down below the mug I sprayed on some purple glaze. It is so subtle that I don't know why I did it. But I liked the shading.

Once this dried it was time to load and fire and

load and fire and

load and fire and

load and fire. I did 7 two layers in the kiln loads.

The fun part is unloading the kiln.

Dan's job was to carry them into the house and then to inspect them to see if any needed touch up.

Dan is a good inspector. It only takes one spec of dust to cause a defect that needs work.

Overall there were not that many that did.

It's fun to see them lined up with a few of the AP's.

They are not done. There is still one more step to go.

Cheers, Wendy