Post #778095 by Aloha Daddy on Sat, Jul 22, 2017 11:52 AM

Ok, sorry for taking so long, crazy week. Anyway, I took some measurements and additional photos, hopefully this will answer your questions.

Overall dimensions: 51 1/2" wide x 20 1/2" deep x 78" tall

Frame is made of 2 x 4 frame, in all corners and 2 in the center with a 2 x 4 frame top & bottom. The top is make of a thick marine grade plywood. All commercial aquarium stands I've seen are made of the same construction.

Tank was used for saltwater and has an overflow compartment in the back plumbed with 2 returns, 1 on each side with a "toothed" top to filter the surface of the water. The pump was housed in the box, water would enter through the top and returned through the returns adding to good circulation in the tank. The heaters were also housed in the box so you wouldn't have to see them in the tank.

Here are some more photos;

Access doors in the canopy propped open

base doors open showing inside stand

Looking inside the tank

Overflow box inside tank is covered with corraline algae from saltwater tank. This box may be removed easily is desired.

Inside view of stand looking up to the inside top of stand

Inside view of stand looking directly inside at floor of stand.

[ Edited by: Aloha Daddy 2017-07-22 11:54 ]