Mariner Mike's Below Decks [Completed!] - Home Tiki Bars

T tikiskip Grand Member (8 years) Joined: Nov 26, 2005 Posts: 5993	T tikiskip Posted posted on Tue, Oct 16, 2018 11:59 AM "According to NEC Article 330.30, MC cable must be supported and secured at intervals of 6 feet or less (unless routed through a framing member) and cables containing four or fewer conductors sized no larger than 10 AWG must be secured within 12 inches of every termination." Looks like you are good on that one. "Where not subject to physical abuse, Type MC Cables are permitted to be installed as service, feeder, and branch circuit cables for lighting, power, control, and signaling circuits." Who knows what they call "not subject to physical abuse" but this is the one I was thinking about. https://www.ecmag.com/section/systems/review-metal-clad-cable-requirements

"According to NEC Article 330.30, MC cable must be supported and secured at intervals of 6 feet or less (unless routed through a framing member) and cables containing four or fewer conductors sized no larger than 10 AWG must be secured within 12 inches of every termination."

Looks like you are good on that one.

"Where not subject to physical abuse, Type MC Cables are permitted to be installed as service, feeder, and branch circuit cables for lighting, power, control, and signaling circuits."

Who knows what they call "not subject to physical abuse" but this is the one I was thinking about.

https://www.ecmag.com/section/systems/review-metal-clad-cable-requirements

Post #790518 by tikiskip on Tue, Oct 16, 2018 11:59 AM