Post #792518 by danlovestikis on Fri, Jan 18, 2019 9:26 AM

hang10tiki I put you on the list. As a shot glass collector I should have though of that. I bet I could convert it. Thank you for the idea.

===========================

More steps for making the Harvey shaker mold.

Dan found a shipping box of the right size to use for the next mold piece.

I put in the blocks and covered them with clay, sorry missed that photo. Then I painted on the mold soap, missed that photo too.

We were making a huge mold at the same time so I lost track of what photos I needed to take. So we poured in the plaster and let it set up.

Then I removed the clay and the blocks.

Two pieces are done and now I need to prep to do the last piece.

I trimmed the mold to make the connection with the sculpt tight. I don't want any sharp edges that will break off.

I cleaned off the crumbs and then I did the mold soap, three times wiping off the excess between, before setting it up for the pouring of the plaster.

One day I will show the steps for the bigger project. Cheers, Wendy