Leroys Lū‘au Lounge - Home Tiki Bars

L leevigraham Grand Engineer Newcastle, Australia Joined: Aug 24, 2018 Posts: 374	L leevigraham Posted posted on Sat, Feb 2, 2019 9:33 PM Ceiling update I started working on covering the ceiling before the last post but the photos didn't upload. The plan for the ceiling is / was to cover the whole ceiling with some kind of matting hiding the silver foilboard. I considered a couple of options but finally settled on bamboo matchstick blinds from Spotlight. I chose these becuase a) they come in 1800mm x 2100mm size which means I would only need 6 b) they are currently on clearance which means the are $20 each. To cover the whole ceiling would only be $120. It turned out that they only had 4 1800mm x 2100mm which meant I needed to get 3 smaller widths to finish the job. I cut down some 700mm x 45mm timber to create battens then screwed them to the roof spacing them 600mm apart Then I stapled the matchstick blinds to the battens which looked pretty good But we can do better. Looking back towards the door. I'll eventually trim the overhang and figure out another way to hide the roller. Taking some inspiration from BambooBen I wanted to add a bit more texture to the ceiling and give me a place to hand lamps and oddities. I crosshatched some bamboo halves and bound them together with jute twine Then I had a SC Mai Tai to cool down I trimmed a smaller section of the bamboo to fit to the point of the ceiling. As it turned out the spacing was perfect and all the squares have consistent spacing. I replaced the fluro globes with power points which were unsupported so I build a couple of quick mounting boards out of spare yellow tongue and trimmed them with bamboo. I probably cover the points with a vinyl wrap so they blend in more during the day. Gluing on the trim Points mounted. Lighting update I moved the raspberryPi and lighting controller out the the shed to start testing the lighting. I ended up back lighting the bar first… which will probably change. Testing rainbow follow pattern. A bit full on for a tiki bar but a good test. Video Photo Then I tried a solid red with candle pattern in the lantern on the bar There's more pics in the gallery if you're into detail. Next steps are to finish the bamboo on the ceiling. I have to sand another 22 poles which I am not looking forward to. Cheers Leevi [ Edited by: leevigraham 2019-02-02 21:35 ]

Ceiling update

I started working on covering the ceiling before the last post but the photos didn't upload. The plan for the ceiling is / was to cover the whole ceiling with some kind of matting hiding the silver foilboard. I considered a couple of options but finally settled on bamboo matchstick blinds from Spotlight. I chose these becuase

a) they come in 1800mm x 2100mm size which means I would only need 6
b) they are currently on clearance which means the are $20 each. To cover the whole ceiling would only be $120.

It turned out that they only had 4 1800mm x 2100mm which meant I needed to get 3 smaller widths to finish the job.

I cut down some 700mm x 45mm timber to create battens
then screwed them to the roof spacing them 600mm apart
Then I stapled the matchstick blinds to the battens
which looked pretty good But we can do better.
Looking back towards the door. I'll eventually trim the overhang and figure out another way to hide the roller.

Taking some inspiration from BambooBen I wanted to add a bit more texture to the ceiling and give me a place to hand lamps and oddities.

I crosshatched some bamboo halves and bound them together with jute twine
Then I had a SC Mai Tai to cool down
I trimmed a smaller section of the bamboo to fit to the point of the ceiling. As it turned out the spacing was perfect and all the squares have consistent spacing.

I replaced the fluro globes with power points which were unsupported so I build a couple of quick mounting boards out of spare yellow tongue and trimmed them with bamboo. I probably cover the points with a vinyl wrap so they blend in more during the day.

Lighting update

I moved the raspberryPi and lighting controller out the the shed to start testing the lighting. I ended up back lighting the bar first… which will probably change.

Testing rainbow follow pattern. A bit full on for a tiki bar but a good test. Video Photo
Then I tried a solid red with candle pattern in the lantern on the bar

There's more pics in the gallery if you're into detail.

Next steps are to finish the bamboo on the ceiling. I have to sand another 22 poles which I am not looking forward to.

Cheers Leevi

[ Edited by: leevigraham 2019-02-02 21:35 ]

Post #792905 by leevigraham on Sat, Feb 2, 2019 9:33 PM