Post #793379 by danlovestikis on Sat, Feb 23, 2019 7:42 PM

hang10tiki how cool is that. I'd never seen photos of those before. Reminds me of my wall of heads that have now gone on to other places to rest. Thank you.

================================

SACRAMENTO CRAWL MUG 2019 for the Lanai. You can search for the Lanai here on TC for more information.

These steps were done from November 20th until November 24th, 2018.

Having the right carving tools helps speed it up. First I built it with clay and now I'm removing some of that clay.

I cut out what I needed to remove and then again I smoothed the sides.

Next I began a lava rock foundation.

The iron look is leaving fast.

Next I began some bamboo siding.

On the roof I made a block to support the sign for the Lanai. I made it so the mold piece could pull straight off. At the back end where the bamboo ends, that will be the opening into the mug.

I printed out the Lanai logo and put it in place.

I used a sharp knife to cut around each letter.

Now it will be easy to have the letters just right.

I used a flat stick to gouge out the clay.

I used a ballpoint to make a look of lava around the letters. Then I added The and the palm tree.

It's taking shape. I'm figuring it out as I go. I did not start with a drawing.

Cheers, Wendy