Tiki Central / Tiki Drinks and Food
Philosophy behind the float?
Pages: 1 9 replies
KD
Kill Devil
Posted
posted
on
Mon, Feb 17, 2014 7:31 AM
OK folks - we've all seen many a drink recipe calling for a float of dark Jamaican, 151 Demerara, sherry, etc... What I want to know is why, and is it the same reason for all floats? Is it aesthetics? Is it a desire to have a spirit stirred in vs shaking? I don't think I've ever heard a straight answer, or at least an interesting one, enlighten away! |
G
gabbahey
Posted
posted
on
Mon, Feb 17, 2014 8:16 AM
I'm not sure if this is the reason for the float but I find it brings the booze smell forward without having the first drink taste too boozy. So a Zombie keeps its strong reputation while letting the 151 sneak in. gabbahey |
CAA
Chip and Andy
Posted
posted
on
Mon, Feb 17, 2014 8:16 AM
Lots of reasons for the float. One of the primary reasons is to keep the drink at the desired proof top to bottom. As you sip the drink through your straw, the ice is melting and slowly watering the drink down. As the drink gets lower in the glass, the ice is melting faster and watering the drink down more and more. By adding a float of liquor on top you are adding a level/layer of alcohol that is combating that additional water. It makes the 'bottom' of the drink taste as good (hopefully) as when you took the first sip. Floats can also be simply for looks, a nice layer of whatever on top can be visually interesting. And as a general rule any drink that has a float is going to be served with a straw. Otherwise the first sip of the drink is the float and if you are floating overproof liquor then you're going to burn out the tasters and the rest of the drink will not be enjoyable. |
A
AdOrAdam
Posted
posted
on
Mon, Feb 17, 2014 10:24 AM
I usually stir in the float but I serve it with it on top (Eg Dark & Stormy). The Shark Tooth is one such drink where the float is part of the drink (it is meant to be sipped without a straw) , but I usually stir it in & use a straw. |
KD
Kill Devil
Posted
posted
on
Tue, Feb 18, 2014 9:16 AM
Thanks for the replies - interesting theory Chip! I'm leaning towards the aesthetics, at least in most examples I can think of |
A
AceExplorer
Posted
posted
on
Tue, Feb 18, 2014 11:17 AM
I thought about this as I was making Viking Fog Cutters last night which call for an Aquavit float. Sometimes it's hard to tell if your float is actually floating. My Aquavit was hard to see because it is clear, and for all I knew, it may have been running down the inside of the glass and mixing with the drink. We all agreed it was a damn fine cocktail. I quickly forgot all about the float and this thread. heh... |
D
Destro100
Posted
posted
on
Wed, Feb 19, 2014 7:56 AM
For the Viking Fog Cutter I definitely believe that the aquavit enhances the flavor of the whole drink. I was glad mine immersed itself. |
T
thePorpoise
Posted
posted
on
Wed, Feb 19, 2014 9:47 PM
here's another old thread on this topic: http://www.tikicentral.com/viewtopic.php?topic=38993&forum=10 |
T
thePorpoise
Posted
posted
on
Wed, Feb 19, 2014 9:49 PM
with aquavit, and sherry floats, i let them dilute into the end of the drink. with a dark rum float, i remove straw and poke through float on first few sips to decide if i want that float at the end or if i'd rather just mix it into the drink. |
G
gabbahey
Posted
posted
on
Wed, Feb 19, 2014 9:52 PM
As an aside, my favorite tool for floats is the standard swizzle from Frankie's. It has an nice spear to pour onto that works much better than pretty much anything else. gabbahey |
Pages: 1 9 replies