Post #199886 by Benzart on Thu, Nov 24, 2005 8:43 AM

One of several things happened.
If you stained it first, the stain may not have been dry enough.

If you put on a coat and then put on Another coat without letting it dry.

Maybe the poly was not mixed enough to get the proper consistency.

Maybe it is Too COld to apply the poly,, Check the lable for temp minimums.

Maybe you grabbed the jar of honey instead of poly.

Now IF it is the first one and the stain is not dry, the poly will NEVER dry.. Remove it and start over.

If it was the second scene, Remove the poly and start over.

IF it is too cold? I don't think the poly will ever cure now even if you put it in a heated room with the correct temp..Remove it nad apply in correct temp setting.

If it was the honey, first get your glasses updated and open can in a well lit area so you can read the lable and second, let your pets lick off all the honey and what they leave, remove yourself then open the Right can and apply after the stain has dried, applying one coat at a time letting it dry before adding the second coat.

Oh yes, you Could have a bad can of poly that will never dry no matter what you do to it.

HONEY HONEYHONEY..

[ Edited by: Benzart 2005-11-24 09:37 ]