Kirby' s Dune Buggie Ready for Oasis CAR show pg 3 - Other Crafts

J john Member Chandler, Arizona Joined: May 05, 2005 Posts: 345	J john Posted posted on Fri, Jan 13, 2006 11:47 PM On 2006-01-12 12:02, Kanaka wrote: Kirby, I'm building a tikified dune buggy too with a little rat rod thrown in for good measure. I've got a late 60's buggy that was set up for a FWD Oldsmobile Toronado 455 engine and turbo 425 FWD auto tranny in the back. The front clip of the Toro was cut and welded to a custom frame front. The stock Toro torsion bars were then flipped around to the front and all mounts rewelded. I've just acquired the drivetrain and title donor car, a 1973 Toronado w/ 455. I'm going to use the GM steering column with shifter so I can have a completely flat floor and do a Model T/model A roadster style tuck and roll interior with bench seat in green and silver metal flake vinyl and a matching tuck and roll upholstered engine cover over the back seat area. After I work all the bugs out I'm getting a new green metal flake manx style body and side panels from http://www.dunebuggybody.com here in Atlanta. I plan on using the Mooneyes surfboard rear view mirror and Iron cross fender mount mirrors, getting a tiki shifter knob and doing lots of tiki pin stripping on the body. I wish someone made some Tiki or Hang Loose/Shaka sign style tail lights but for now I'm using these peace sign lites as a 60's throw back! Should be a real wheelie machine! Scotty [ Edited by: Kanaka 2006-01-12 12:55 ] i need this for tailgaters

On 2006-01-12 12:02, Kanaka wrote:
Kirby,

I'm building a tikified dune buggy too with a little rat rod thrown in for good measure.

I've got a late 60's buggy that was set up for a FWD Oldsmobile Toronado 455 engine and turbo 425 FWD auto tranny in the back. The front clip of the Toro was cut and welded to a custom frame front. The stock Toro torsion bars were then flipped around to the front and all mounts rewelded.

I've just acquired the drivetrain and title donor car, a 1973 Toronado w/ 455.

I'm going to use the GM steering column with shifter so I can have a completely flat floor and do a Model T/model A roadster style tuck and roll interior with bench seat in green and silver metal flake vinyl and a matching tuck and roll upholstered engine cover over the back seat area. After I work all the bugs out I'm getting a new green metal flake manx style body and side panels from http://www.dunebuggybody.com here in Atlanta.

I plan on using the Mooneyes surfboard rear view mirror and Iron cross fender mount mirrors, getting a tiki shifter knob and doing lots of tiki pin stripping on the body.

I wish someone made some Tiki or Hang Loose/Shaka sign style tail lights but for now I'm using these peace sign lites as a 60's throw back!

Should be a real wheelie machine!

Scotty

[ Edited by: Kanaka 2006-01-12 12:55 ]

i need this for tailgaters

Post #207488 by john on Fri, Jan 13, 2006 11:47 PM