Post #369668 by Polynesiac on Thu, Mar 27, 2008 3:27 PM

"weird stuff" being mold. depending on how fresh your palm is, how deep you carved and where you place it while it is drying you may some white fuzzy mold appear. very normal for "wet" carvings to produce mold if left to dry in a cooler location. just use any type of mold remover and it's gone. I usually use mold remover and place the tiki in direct sun for a while. sometimes it comes back, just remove the mold again.

IF the palm is really wet (read this like it's juicy) then I'd hold off on the stain, but if the palm seems dry enough (and depending on how deep you carved), you can apply stain anytime, but be prepared for a little mold to come through the stain. Depending on how thick your wood is (!), it can take a year or more for it to completely dry - you'll know it's dry because it no longer weighs a million pounds.

burn away at anytime.

You can also use a grinder with a sanding attachment to remove the fibers, but burning works very well...it just smells terrible.

now that this one is nearing completion, it's time to start the next one!!!

edit ------
sorry, I just noticed Kate was referring to sealing the tiki and weird stuff happening - she's right. I would wait a little (like a few months) before I sealed it, but that's just me. the sealer seems to wear off faster the wetter the log is while it is still drying.

Polynesiac - putting the "F" back in "ART"

[ Edited by: Polynesiac 2008-03-27 15:30 ]