Sac Ohana Tiki Crawl October 4th, 5th and 6th, 2019 . Updated 9/30/19 info on mug page 3 bottom - California Events

D danlovestikis Grand Member (8 years) Joined: Jun 17, 2002 Posts: 9216	D danlovestikis Posted posted on Mon, Jul 22, 2019 9:27 AM =================================== More new photos of the steps we took to make the Sac Ohana Crawl mug for October 2019. I confess. I've been negligent in putting the temperature cones into the kiln when firing. I finally did it. You want the cone to bend like the first one. However that's on 05 and I'm firing at 06. My kiln is firing too hot. I still think the problem was dust but I need to install a new thermal couple. Meanwhile I will fire at 07 to cool it down. Kilns fire like this: 08 07 06 05 04 03 02 01 0 1 2 3 4 5 6 etc. So 07 is cooler than 06. Glazing. Glazing. Firing. Firing. The mugs go to so many locations as the work is done. Out of the kiln. Even with the lower temperature the same skips are showing up. Fire. Scrub. Glazing. Fire. Fire. Those having fired twice and looking pretty good now. After the first firing it's back to the glazing table. There's so much work to do however I am seeing the end coming closer. Wendy

===================================
More new photos of the steps we took to make the Sac Ohana Crawl mug for October 2019.

I confess. I've been negligent in putting the temperature cones into the kiln when firing. I finally did it.

You want the cone to bend like the first one. However that's on 05 and I'm firing at 06. My kiln is firing too hot. I still think the problem was dust but I need to install a new thermal couple. Meanwhile I will fire at 07 to cool it down. Kilns fire like this:

08 07 06 05 04 03 02 01 0 1 2 3 4 5 6 etc. So 07 is cooler than 06.