Post #796393 by danlovestikis on Tue, Jul 23, 2019 9:22 AM

hang10tiki, J + J is going strong! Dan said your tiki find is pregnant! Thank you for taking us along on your anniversary trip to Oahu. I had fun every single day you posted.

===============================

Back to work on the production of the Sacramento Crawl mug for October 2019.

Once again the cones that are too melted are the 06 cones. Those that are just bent over are the 05 cones. The kiln is firing too hot. So even though that proved to not be the reason for the skips it is time to change the thermal couple, which measures the heat level inside the kiln.

The part that is sticking out is the thermal couple. I need to remove it and put in a new one.

Dan removed all the screws for me and opened the box. The thermal couple is right in the middle of this mess.

I'm pointing to the two ends of the thermal couple. The two screws holding it in place are lessened and then

I just pulled it out from inside of the kiln. So this is now garbage. I reversed the process and installed a new one.

Since I was still worried as to whether this fixed the heat issue I put a line up of cones to check. The first is O5, the second just bent over is the 06 and the last one badly melted is 07. Fixed? NO because I fired at 07 just in case. So it's still too hot. But since I can just fire one number down I'm not going to worry about it. Problem solved. Wendy