Post #87895 by Benzart on Fri, Apr 23, 2004 7:25 PM

I don't use stones.
I have the stack of 9 sheets sized 8 1/2 by5 1/2 ( 1 large sheet cut in half) arranged on the Clipboard with the 220 on the bottom and the 2000 on top.
Just start with the 220 and Rub the chisel edge flat across the sheet several times until the edge is sharp and has no nicks.(after a few times you will develop a skill and will know how to rub the edge on the paper) If you can imagine the Sharpened edge of the chisel with a coat of rust. You hold the chisel with the edge flat on the paper and rub it back and forth to remove the rust in an Evenway, so that the whole edge comes in contact with the abrasive.
Here is another link with a little better prices but without the adhesive.The Sampler package comes with grits from 150 thru 2000. If you want a higher mirror you can get the Micro-Mesh grits 2400,3200,3600,4000,6000,8000 and 12000, but unless you are doing Super fine work it is just overkill.
I know it is a long way away but at this years Hukilau, I will demonstrate the sandpaper method to anyone who asks.