Welcome to the Tiki Central 2.0 Beta. Read the announcement
Tiki Central logo
Celebrating classic and modern Polynesian Pop

Tiki Central / Other Crafts

Diffusing a Fish Trap Light

Pages: 1 9 replies

Hi,

I just found a really sweet trap at a goodwill, and I want to make a lamp out of it... but I can't figure out what I should use to diffuse the light coming out of the thing? Any suggestions?

Also, how do I get it inside with all the internal workings?

Any and all suggestions appreciated!

Krakatowa

T

Show a picture of the trap.
Sometimes it's best to use a bulb that
looks good enough that you don't need a
diffuser of any kind.
Like one of those xmas snow type lights.

T

Here's the bulb I am talking about.
Plus some trap lamps.
Are these the lamps you have?


On 2007-06-29 07:18, tikiskip wrote:
Show a picture of the trap.
Sometimes it's best to use a bulb that
looks good enough that you don't need a
diffuser of any kind.
Like one of those xmas snow type lights.

The trap itself looks just like this one http://www.trocadero.com/stores/rmarko3213/items/667569/item667569.html

These appear to have the guts removed, with a lamp installed. I really dig the bulb you showed though, and I think I am going to give it a try.

Thanks

Krakatowa

T

On that one I would go and get some
cool art paper.

[ Edited by: tikiskip 2015-03-29 13:00 ]

On 2007-06-29 18:53, tikiskip wrote:
On that one I would go to Dick blick and get some
cool art paper.
Thai reversible paper, get the copper color.
Stock #11225-8205
http://www.dickblick.com

That seems like a really cool idea Tikiskip, thanks. Any suggestions on getting it in? I looked at the internals, and amazingly its one to three bamboo/rattan pieces bent in "u" shapes around the frame... like one continuous weave. I am afraid if I try and clip them out, the thing won't have any structural support.

Really great idea though, and thanks for your helpful input.

T

I would need a picture.
But I would say can you make 4 or more strips
And glue them in one at a time?
Or you could do a bunch of random patches if you will
glued together.
I might make new guts (3 rings) glue/wire inside then cut at will.
Just keep looking at it.
The answer will come.
I don't think the snow bulb would work.
Bulb is too small, and the slats are too wide.

On 2007-06-30 14:34, tikiskip wrote:
I would need a picture.
But I would say can you make 4 or more strips
And glue them in one at a time?
Or you could do a bunch of random patches if you will
glued together.
I might make new guts (3 rings) glue/wire inside then cut at will.
Just keep looking at it.
The answer will come.
I don't think the snow bulb would work.
Bulb is too small, and the slats are too wide.

Skip

I took your advice and scored some Thai reversible paper... the Copper tone is sweet. I had to remove the inner workings of the trap, but managed to reattach the inner rings with the wire removed in the process. Lined the trap with the paper, ran a line of glue to hold it in shape, and covered the bottom with the same paper. Looks sweet!

I took a flickering led lamp from a paper lantern I bought at Target (what I would give to get a few more of these flicker lamps!) and it works like a charm... though a bit dim. I have a 40watt candelabra bulb on standby... it really brings out the color. When the Den is done I will decide what wattage to make it.

Thanks for the advice.

Now I need to start making Puffer Fish Lamps again. :)

T

Glad it worked.
We need to see some pics.

On 2007-07-17 20:36, tikiskip wrote:
Glad it worked.
We need to see some pics.

Skip

Working on it... I need to get the camera from a deadbeat sibling. Will post as soon as I get it back.

Pages: 1 9 replies