Welcome to the Tiki Central 2.0 Beta. Read the announcement
Celebrating classic and modern Polynesian Pop

Tiki Central / General Tiki / OK how about- Has anyone built a hut/bar using 6 inch diameter pine poles for roof supports?

Post #317461 by Swanky on Mon, Jul 9, 2007 10:34 AM

You are viewing a single post. Click here to view the post in context.
S

Logs, not bamboo is used more for building A-Frames on the islands.

If you do an A-Frame, you will need to create a strong "block" on the outside of the logs on the ground. That structure is going to want to fly apart and there are two solutions: A) Make a frame, which means cross beams. But, you want it open inside. B) Secure the footers so they cannot move out or sideways.

The issue you are going to have is with moisture and those footers. You need to cover this thing so very little rain gets to the feet. Water and wood will lead to rot. Ideally, you keep them dry. Second ideal, you make a way for air to move under the wood so that it dries out when wet. For installed carvings, I have seen them put on pipes so there is little room for water to stay and room for air to move through and dry out the water. Figure out your solution to this problem before you start or you will be very sorry.