Portable Bamboo over PVC Tiki Bar - Home Tiki Bars

RT Ricky Tiki Member Ozarks Joined: Mar 23, 2011 Posts: 13	RT Ricky Tiki Posted posted on Fri, Jun 3, 2011 5:26 PM Here are pics of my portable Tiki Bar. The Bar top is 24" by 72". The bar frame is made from 1 1/4 pvc with support legs using 1" pvc. I made hollow bamboo by drilling two connected 12" extension through bamboo then fitting that bamboo over the 1" pvc. To fit the 1" pvc through the 1 1/4" I used a Woodstock D2854 1-5/16" Forstner Bit Woodstock D2854 1-5/16" which is the exact outside diameter of a 1" pvc pipe. I used hole saws to cut the holes for the bamboo frame to make the roof. Then I drilled through the entire bamboo piece and inserted glue covered dowels to hold the frame tightly in place. For further info just ask.

Here are pics of my portable Tiki Bar. The Bar top is 24" by 72". The bar frame is made from 1 1/4 pvc with support legs using 1" pvc. I made hollow bamboo by drilling two connected 12" extension through bamboo then fitting that bamboo over the 1" pvc. To fit the 1" pvc through the 1 1/4" I used a Woodstock D2854 1-5/16" Forstner Bit Woodstock D2854 1-5/16" which is the exact outside diameter of a 1" pvc pipe. I used hole saws to cut the holes for the bamboo frame to make the roof. Then I drilled through the entire bamboo piece and inserted glue covered dowels to hold the frame tightly in place. For further info just ask.

Post #592175 by Ricky Tiki on Fri, Jun 3, 2011 5:26 PM