Tiki Central / Other Crafts
Art Swap 2024 Witco - Drawing Done!
M
MadDogMike
Posted
posted
on
06/30/2024
in reply to Hamo
Great inspiration Hamo! Brushed a bit of black underglaze on my fountain, wiped some of it off, and a bit of light sanding. Could go in the kiln as early as this evening. |
G
GROG
Posted
posted
on
06/30/2024
GROG give thumbs up, if GROG had opposable thumbs. |
M
MadDogMike
Posted
posted
on
06/30/2024
in reply to GROG
LOL GROG! Out of the kiln without incident! I have a few finish options that I've come up with. What do you think? #1 Unglazed on the outside. I like the look of old, aged wood. Then just glaze the inside to make it food safe. #2 Glazed on the outside. This is wet with water, actual glaze would be glossier. #3 Glazed only in the bowls to look like they are wet. Again, real glaze will be more glossy. #4 Bowls glazed blue to represent water |
G
GROG
Posted
posted
on
06/30/2024
GROG vote for #3 Glazed only in the bowls to look like they are wet. BUt, GROG not opposed to glazing the whole thing to make it darker and bring out the contrast. You could thin out your glaze so it's not TOTALLY glossy, but I'd do test samples first to determine how thin to make your glaze. |
M
MadDogMike
Posted
posted
on
06/30/2024
in reply to GROG
MadDogMike too impatient to do test tiles LOL I have not tried that watering down technique. I may need to actually do some test tiles. I had a clear satin glaze but wasn't too happy with it. It tended to fire milky in places. Thanks GROG |
S
swizzle
Posted
posted
on
07/01/2024
in reply to MadDogMike
Is that low or high fire Mike? |
D
danlovestikis
Posted
posted
on
07/01/2024
hang10tiki 7/21/24 is 20 days away!!! MadDogMike that's beautiful as is. Hamo and Swizzle love seeing your names pop up. Time to reveal some more step by steps on my Witco Fountain painting. I did four layers and then highlighted the curve. While painting a show on Pompeii was on. They uncovered a painting. The Pompeii had a piece that reminded me of parts of the Witco I was painting. The first painting of Pizza ever found in antiquity. |
M
MadDogMike
Posted
posted
on
07/01/2024
Swizzle it's a high fire clay fire at ^04. [ Edited by MadDogMike on 2024-07-01 08:15:33 ] |
M
MadDogMike
Posted
posted
on
07/01/2024
It's July 1st, 21 more days! Here's our lineup as of now So we have 9 potentials, that's a decent start Joshua Bell will not be joining us this year and I hear rumors that Cy will not either, both have other things going on in their lives. I have reached out to some of the others via FaceBook, we'll see if I hear from them [ Edited by MadDogMike on 2024-07-01 08:30:53 ] [ Edited by MadDogMike on 2024-07-01 08:48:28 ] |
H
hang10tiki
Posted
posted
on
07/02/2024
Mad Dog #3 Wendy- go go go Iβll update soon. I hope |
S
swizzle
Posted
posted
on
07/02/2024
in reply to MadDogMike
Not quite sure what you mean by highfire ^04 (earthenware or stoneware?), but the reason why i asked is because there's a particular glaze that is designed to pool in the bottom of bowls which from memory cracks but looks like water and would be perfect for your design. I just can't remember who makes it or what cone it fires to. |
M
MadDogMike
Posted
posted
on
07/02/2024
in reply to swizzle
Hmmmm.. I know there are crackle glazes, I wonder if that's it? It's a high fire clay but it's low fired (I haven't had any problems with that technique) I wanted to use brown clay for this project but couldn't find any lowfire brown. Well, I'm done! |
D
danlovestikis
Posted
posted
on
07/02/2024
MadDogMike that's a wonderful work of tiki art. Super cool. |
D
danlovestikis
Posted
posted
on
07/02/2024
I have finished my piece. Title: Witco on Edge. The stars actually sparkle as you walk across the room looking at the painting. I put more steps on my "other crafts" page but this is enough for here. Taken with a flash. |
OGR
Or Got Rum?
Posted
posted
on
07/02/2024
Excellent Work Mike and Wendy...Bravo. I'm on the home stretch of my version of what an early 60's Witco ad could have looked like. |
H
hang10tiki
Posted
posted
on
07/04/2024
Wow Great minds think alike Good job you two |
D
danlovestikis
Posted
posted
on
07/05/2024
Or Got Rum? An early 60's Witco ad sounds really intriguing. hang10tiki thank you for thinking we have great minds! I tweaked the painting. I noticed I was missing the design on the bottom left when looking at MadDogMike's mug. Image Missing: https://tikicentral.com/resize.php/uploads/251/66877c568459b.jpg?w=1280&h=1280&fit=max&sharp=5&s=b9c6b175cefafdf1babaa9a515c64465 [ Edited by danlovestikis on 2024-07-04 21:53:49 ] |
T
Image Missing: https://www.gravatar.com/avatar/8e2554124f0d1830625df8e10abad657?d=blank&s=192&fit=fill
TikiAno
Posted
posted
on
07/06/2024
Alohaaaaa. Okay I'm late- after Mad Dog and Wendy reaching out but would love to join in. Years ago I had found an almost instructional brochure re: Witco chainsaw carving and thought I had saved it on a computer. It was probably three or four computers ago and looks like i'm up a certain creek without a paddle. Anthony, I love the bat sculpt, Mad Dog & Wendy, fantastic work as always! I'm torn a few different ways but work is slow this week so I may do some test work to see which direction I will go. Unfortunately no more kiln access- or time- to work in clay. It might be time to get a chainsaw to approach this correctly- or it might just help me learn how to juggle. (Original Calvin & Hobbes cartoon below to "get" this reference).Image Missing: https://tikicentral.com/resize.php/uploads/76769/66888e8dcf57f.jpg?w=1280&h=1280&fit=max&sharp=5&s=020397e1d6d1f46a7210703e6bb5196c Look forward to seeing all of the other entries (and mine as well)! [ Edited by TikiAno on 2024-07-05 17:25:05 ] |
M
MadDogMike
Posted
posted
on
07/06/2024
danlovestikis I am so glad you fixed that error, it was bugging me but I didn't know how to tell you. Just kidding LOL I hadn't noticed :D Go TikiAno, Go! |
OGR
Or Got Rum?
Posted
posted
on
07/06/2024
in reply to danlovestikis
Yes, It's in my mind what an ad would have looked like. |
H
hang10tiki
Posted
posted
on
07/09/2024
Image Missing: https://tikicentral.com/resize.php/uploads/21154/668c801b3a0e1.jpg?w=1280&h=1280&fit=max&sharp=5&s=3167d35c8d331b6b2ebb746a5ded1715 OK, finally got my carving station set up, my wife said it looks like one of Dexterβs rooms lol Time to get rolling on the carving |
M
MadDogMike
Posted
posted
on
07/09/2024
in reply to hang10tiki
I like it! A clean room so that the dust from the rest of the house does not get on your carvings!!! |
H
hang10tiki
Posted
posted
on
07/09/2024
Mike- I like the way u think Was deciding on three, going with this one Image Missing: https://tikicentral.com/resize.php/uploads/21154/668d75879ed27.jpg?w=1280&h=1280&fit=max&sharp=5&s=e2b0f1ceed4c23e901404bd3c3aa0561Image Missing: https://tikicentral.com/resize.php/uploads/21154/668d758502661.jpg?w=1280&h=1280&fit=max&sharp=5&s=354bde75a3416032da2f05255f1f5ebdImage Missing: https://tikicentral.com/resize.php/uploads/21154/668d7586286a7.jpg?w=1280&h=1280&fit=max&sharp=5&s=a283bd63df5fb176eaeccde31ae64e2d |
M
MadDogMike
Posted
posted
on
07/10/2024
in reply to hang10tiki
:D |
D
danlovestikis
Posted
posted
on
07/10/2024
Looking good hang10tiki. Pretty soon the countdown in days will start. |
H
hang10tiki
Posted
posted
on
07/10/2024
Image Missing: https://tikicentral.com/resize.php/uploads/21154/668eadcdb8702.jpg?w=1280&h=1280&fit=max&sharp=5&s=a75986cbdd3acdd071fb363966e7e039 |
D
danlovestikis
Posted
posted
on
07/10/2024
hang10tiki you carve like I paint. Great minds think alike. |
H
hang10tiki
Posted
posted
on
07/11/2024
:-) |
H
Image Missing: https://tikicentral.com/resize.php/uploads/81752/6232869dd2cbf.jpg?sharp=10&fit=crop&w=96&h=96&s=bc1f160b34a2f2d289f879012477d3d2
Hamo
Posted
posted
on
07/11/2024
Great work, Mike and Wendy. Go H10 and Or Got Rum?! And glad to see you make an appearance, TikiAno! I forgot that this year's deadline is July 21, so I'd better get going. I won't have enough time to carve that unfinished frame I mentioned earlier, but I went digging through my collection of other thrifted frames and found this one that works really well. Image Missing: https://tikicentral.com/resize.php/uploads/81752/668f511634a6a.jpg?w=1280&h=1280&fit=max&sharp=5&s=6d82570131590e2b2c165e9d88cc91d3 Traced my inspiration piece so I could transfer it to the linoleum. On to carving next. Image Missing: https://tikicentral.com/resize.php/uploads/81752/668f5315bca5f.jpg?w=1280&h=1280&fit=max&sharp=5&s=2481d0e7d3b759f0981a4adce3645fac Image Missing: https://tikicentral.com/resize.php/uploads/81752/668f5339d6a27.jpg?w=1280&h=1280&fit=max&sharp=5&s=f0889fe86bca40df42659ef6ffb6f42f Image Missing: https://tikicentral.com/resize.php/uploads/81752/668f534a36b16.jpg?w=1280&h=1280&fit=max&sharp=5&s=9c479258867cdc7720086b51a6459e4b |
M
MadDogMike
Posted
posted
on
07/11/2024
Looking good Hang10Tiki and Hamo |
H
hang10tiki
Posted
posted
on
07/11/2024
Go Hamo go Lil more Man itβs hot out Image Missing: https://tikicentral.com/resize.php/uploads/21154/66903c922f1d6.jpg?w=1280&h=1280&fit=max&sharp=5&s=b168292c7a3c0cde254e06fa71b32ac9 |
T
Image Missing: https://www.gravatar.com/avatar/8e2554124f0d1830625df8e10abad657?d=blank&s=192&fit=fill
TikiAno
Posted
posted
on
07/11/2024
Hang10, looking great- and so clean! Hamo, killer idea and moving forward. My brain has been going six ways at once- I still haven't started with my hands. Initially I was going to make a smaller Witco World map, perhaps with some TC influence in there... but then I started looking for this book Image Missing: https://tikicentral.com/resize.php/uploads/76769/66905d8dcb39b.jpg?w=1280&h=1280&fit=max&sharp=5&s=77b6da4b3e7022ef65acf2fe0400ea95 And then, by some divine providence and a very generous person in a FB Witco group, I received a pdf of this out of print gem. So, as I flip through it (more research to be done), I'm thinking I might just follow the (original) directions to see what I can make. For fun and not so much profit. |
M
MadDogMike
Posted
posted
on
07/12/2024
in reply to TikiAno
I'm excited TikiAno! |
H
Image Missing: https://tikicentral.com/resize.php/uploads/81752/6232869dd2cbf.jpg?sharp=10&fit=crop&w=96&h=96&s=bc1f160b34a2f2d289f879012477d3d2
Hamo
Posted
posted
on
07/12/2024
in reply to TikiAno
That resource is super cool. |
H
Image Missing: https://tikicentral.com/resize.php/uploads/81752/6232869dd2cbf.jpg?sharp=10&fit=crop&w=96&h=96&s=bc1f160b34a2f2d289f879012477d3d2
Hamo
Posted
posted
on
07/12/2024
Did some carving this evening. Added some red printing ink (would have been a bit better if it was India ink) and a black Sharpie to add contrast so I could see what I was removing. Image Missing: https://tikicentral.com/resize.php/uploads/81752/66909636bd39d.jpg?w=1280&h=1280&fit=max&sharp=5&s=2d695b9c2c76059badebb2e881bb6330 Image Missing: https://tikicentral.com/resize.php/uploads/81752/6690964f6efca.jpg?w=1280&h=1280&fit=max&sharp=5&s=30f2b61ec0874ee8b2912403b0ec1b9e A preview of the final product Image Missing: https://tikicentral.com/resize.php/uploads/81752/66909792b3f65.jpg?w=1280&h=1280&fit=max&sharp=5&s=fe75257810f46056626ef097aea3d248 |
T
Image Missing: https://www.gravatar.com/avatar/8e2554124f0d1830625df8e10abad657?d=blank&s=192&fit=fill
TikiAno
Posted
posted
on
07/12/2024
Hamo looks great! From looking through the original Witco "How To" book, I decided to follow the directions and try to chainsaw up something as per instructions. (Spoiler, I'm not that great with a chainsaw (though I read that they suggested counterweighting a chainsaw as a way to handle it more easily in the book which sounds like something Mad Dog would certainly do- and do very well. Though I worked as a rigger in film production for many years in the past, I had no block & falls/ pulleys around, and it seemed like way too much work in the middle of the day when I should have actually been working. But, I digress.... Image Missing: https://tikicentral.com/resize.php/uploads/76769/6691afc7b7796.jpg?w=1280&h=1280&fit=max&sharp=5&s=d412d3d7213e64c764d497db2d5628ce This was the "Primitive Mask" I was trying to replicate... Image Missing: https://tikicentral.com/resize.php/uploads/76769/6691afea8c939.jpg?w=1280&h=1280&fit=max&sharp=5&s=91229ecaac1432b88ad4156a2608cf44 The initial design was to use a 36" long piece of 2x10, but I figured that would be a bear to mail, so I used a piece of 2x6 I had. First I tried to freehand the design but then for accuracy I printed out a copy to size and traced it on (somehow my carbon sheets are missing, which would have been a whole lot faster and more accurate....) Image Missing: https://tikicentral.com/resize.php/uploads/76769/6691b04b30857.jpg?w=1280&h=1280&fit=max&sharp=5&s=ec32c11269a21830a011879ef823cbd9 The book has pretty specific details. Here are some pages that I printed out to work from.... Image Missing: https://tikicentral.com/resize.php/uploads/76769/6691b06fb8bd6.jpg?w=1280&h=1280&fit=max&sharp=5&s=be43e9db42fd993eaffc2107d85c7d08 Is this cheating for Art Swap? I'm not sure but I was/ am going for authenticity direct from the Westenhaver's mouth and am intrigued by the process... Image Missing: https://tikicentral.com/resize.php/uploads/76769/6691b0b4d8116.jpg?w=1280&h=1280&fit=max&sharp=5&s=4862cd5814113ae6e0b72a8caecdca69 I sharpied the lines out, and did a few test chainsaw drops. I knew control was going to be an issue.... (this is a huge understatement) Image Missing: https://tikicentral.com/resize.php/uploads/76769/6691b0df12c7d.jpg?w=1280&h=1280&fit=max&sharp=5&s=5d93d63e037942d0a320772a345a1718 I dropped in a few lines, but finer detail was tough (I admit to being used to a small router bit) and it was pretty frustrating, even after practicing a bit. I tried to dig out the mouth area (shown in above pic) but found it tough to get it as even as I had wanted- though it was "primitive" I didn't want anyone to bleed while handling... So, I grabbed the router, went deeper than I would normally go to simulate the chainsaw cut. Image Missing: https://tikicentral.com/resize.php/uploads/76769/6691b16659613.jpg?w=1280&h=1280&fit=max&sharp=5&s=89379badd85768af19a83b2867dafd46 I re-routed a bit in the mouth area but decided to leave it 'rough.' Wire brushed it afterwards, need to wire brush some more, then will burn and stain. Just noticed that I need to remove some other sections of wood and will do this tomorrow. Thanks for looking. [ Edited by TikiAno on 2024-07-12 15:47:47 ] |
OGR
Or Got Rum?
Posted
posted
on
07/12/2024
Fine, Fine Work All.... |
D
danlovestikis
Posted
posted
on
07/13/2024
Hamo, hang10tiki, Tiki Ano the old timers are whipping these out. Great work men. 7/21/24 is almost here. |
T
Image Missing: https://www.gravatar.com/avatar/8e2554124f0d1830625df8e10abad657?d=blank&s=192&fit=fill
TikiAno
Posted
posted
on
07/14/2024
Image Missing: https://tikicentral.com/resize.php/uploads/76769/66932055dee6b.jpg?w=1280&h=1280&fit=max&sharp=5&s=87ef30bc6fd3feb004a51164cab98ec9 Carved more, burned it- then noticed some bad cuts so "edited" a bit then wire brushed the heck out of it. Need to do some sanding to repair some poor marksmanship, then locate my stains, but that should be next up. Thanks for looking. [ Edited by TikiAno on 2024-07-13 17:52:19 ] |
H
hang10tiki
Posted
posted
on
07/14/2024
Looking good everyone Tiki Ano- ya made me cringe when I saw toes and a chainsaw in the same photo!!! Image Missing: https://tikicentral.com/resize.php/uploads/21154/6693479e1bdc5.png?w=1280&h=1280&fit=max&sharp=5&s=71b126f22de09f1244035747dd6a45a4 |
H
hang10tiki
Posted
posted
on
07/14/2024
Image Missing: https://tikicentral.com/resize.php/uploads/21154/669348474cdcf.png?w=1280&h=1280&fit=max&sharp=5&s=52aa1c37d7ef9f249a136bb39ee0f5cd |
M
MadDogMike
Posted
posted
on
07/14/2024
Hamo, looking good! Image Missing: https://tikicentral.com/resize.php/uploads/8801/66935cdabe05b.jpg?w=1280&h=1280&fit=max&sharp=5&s=9b200749b77e319e6963efd45e79751d [ Edited by MadDogMike on 2024-07-13 22:06:40 ] |
H
hang10tiki
Posted
posted
on
07/16/2024
Great video ππΌππΌππΌ |
M
MadDogMike
Posted
posted
on
07/17/2024
About 5 days left, here's where we are - Will carve - Done [ Edited by MadDogMike on 2024-07-19 21:49:21 ] |
T
Image Missing: https://www.gravatar.com/avatar/8e2554124f0d1830625df8e10abad657?d=blank&s=192&fit=fill
TikiAno
Posted
posted
on
07/17/2024
Mad Dog, that video is very impressive. I shouldn't have watched, now I feel terrible about my hack chainsaw work. Hang10, I have ten toes, so no worries there. Well, I HAD ten toes. Now you can call me Hang8.4 or so.... My stains are hiding out from me, so it looks like I have to buy some more tomorrow after work.... |
WC
Image Missing: https://www.gravatar.com/avatar/f65656413dc3836c1b966410b2d886b2?d=blank&s=192&fit=fill
Will carve
Posted
posted
on
07/17/2024
I'm done. I carved those a few years ago as I was preparing for the carve class. |
OGR
Or Got Rum?
Posted
posted
on
07/17/2024
I've been done for a few days..after @37 hours...hard grabbing a good scan as it's 12x17. It is a little sharper than this. It will be in a new plain Black frame...My interpretation of what an illustrated WITCO advertisement may have looked like in the early 60's...Thanks to Ken's website for the masks and logo design. This was fun, thanks. Image Missing: https://tikicentral.com/resize.php/uploads/11023/6697f3d26574a.jpg?w=1280&h=1280&fit=max&sharp=5&s=08898dcaed5afb0cfe6dbb67c98c3991 [ Edited by Or Got Rum? on 2024-07-17 16:44:38 ] [ Edited by Or Got Rum? on 2024-07-18 09:58:07 ] |
M
MadDogMike
Posted
posted
on
07/17/2024
TikiAno I think we all look like hacks next to that video sculptor! [ Edited by MadDogMike on 2024-07-17 16:42:29 ] |