Welcome to the Tiki Central 2.0 Beta. Read the announcement
Tiki Central logo
Celebrating classic and modern Polynesian Pop

Tiki Central / Other Crafts

Kahaka's Tiki Lamps

Pages: 1 2 3 4 5 6 7 8 9 10 11 483 replies

K
KAHAKA posted on 07/05/2013

Mahalo braddahs. Polynesiac, I'm about ready to send one your way. I'll get back to ya in the next couple weeks!

K
KAHAKA posted on 07/09/2013

Aloha Ya'll,

I hadn't looked at or done much with my Flickr page where I upload pics of my lamps in a while, but I just edited, deleted, and rearranged some stuff on there. I would one day like to have a website, but I think their new layout looks awesome, and probably much better looking than something I could put together myself.

Here it is: http://www.flickr.com/photos/rocknrollwoody/sets/72157600546621178/ It's the same site that's in my signature.

Mahalo and Cheers!
Woody

AF
A Frame posted on 07/09/2013

On 2013-07-04 12:58, KAHAKA wrote:
This is the 4th lamp I've finished this summer, on the 4th day of July. Happy 4th, ya'll.

An IOU for Nacho:

Cheers,
Woody

Frickin' Amazing KAHAKA!

K
KAHAKA posted on 07/10/2013

As a general reply to interested parties through PM, all lamps listed on the Flickr page can be replicated, considering the supplies I have on hand. And, if there's something you see on one lamp that you'd like on another, that can be done as well.

Mahalo!!
Woody

W
Woodtiki posted on 07/11/2013

Rad stuff!

H
hiltiki posted on 07/11/2013

Woody, your lamps are fabulous, specially the last one it's so complicated yet so well put together, great job.

K
KAHAKA posted on 07/19/2013

Woodtiki... I really dig your art! You really need to post more of it on here. You're name is Woody also? How cool is that.

Hiltiki... Thanks again!

My sister in-law's dad has been battling throat cancer, and hasn't been doing too good lately. He asked for a lamp a while back, so I finished this one for him today in hopes that it might help him feel a little better. It's a twin to the last one I made to Nacho, with a slightly different bottom.

Thanks for lookin'.
Woody

H
hang10tiki posted on 07/19/2013

Wow, awesome lamp...
Hope he is ok.

Jon

T
TikiPops posted on 07/23/2013

Woody,
That fish lamp is awesome!! & the one for Notch too!! Great work as always. Looking forward to seeing you & what you are bringing to Oasis.

K
KAHAKA posted on 08/16/2013

Mahalo!

See ya'll at Tiki Oasis in the morn'. I'll have these lamps and a few others fer sale out there. Head on by the huge Moai postin' hitch, ya hear?!

Cheers,
Woody

K
KAHAKA posted on 11/10/2013

Aloha TC,

I recently finished the biggest lamp I've built in 10+ years of lamp making for a customer. 24" x 18" didn't sound as big in an email as it looked when it was completed. This sucker is huge.

Anyone figure out a better way to cut the bamboo trivets like the ones on this lamp? I use a miter saw with a 200 toothed blade, but the bamboo still splinters and I have to hand sand each one clean. I've tried a bandsaw, but I can't get straight cuts on pieces this small.

The masters at Oceanic Arts told me they used to order huge bags of bamboo trivets already cut from China back in the day. Those were the days!

Thanks for lookin'.
Woody

T
tikiskip posted on 11/10/2013

Looks like a light for a private back room bar.

[ Edited by: tikiskip 2013-12-03 09:14 ]

K
KAHAKA posted on 11/12/2013

Thanks Skip. I've tried to find another miter saw blade with 200+ teeth to replace the one I have to no avail. I might eventually have to go the jigsaw route.

T
tikiskip posted on 11/12/2013

Yup.

[ Edited by: tikiskip 2013-12-03 09:14 ]

K
KAHAKA posted on 12/11/2013

Aloha,

I've wanted to try a seahorse panel lamp for some time now, so I'd been saving all of my leftover resin and smashing the pieces into tony bits to collect enough for a faux stain glass effect. I'm guessing there's over 25 hours in this project and over 4 pounds of resin. There's a lot I learned through making this one, but I'm glad to be done. This one is going to my brother and his family for Christmas.

Mele K,
Woody

H
hiltiki posted on 12/12/2013

You are so good.

K
KAHAKA posted on 12/12/2013

On 2013-11-10 13:46, tikiskip wrote:
Looks like a light for a private back room bar.

[ Edited by: tikiskip 2013-12-03 09:14 ]

Ha... Nope. This one was for a customer in Illinois. I'm guessing he has really tall ceilings!

K
KAHAKA posted on 12/12/2013

Thanks hiltiki! I'm still learning.

T
TikiPops posted on 12/12/2013

Woody,
Stunning!! Your lamps are always awesome.

K
KAHAKA posted on 12/17/2013

Thanks TikiPops... I'm digging the work you're doing on those lamps too. You're kickin booty with that router!

I tried to make a hat that would fit on top of the seahorse lamp, but it was too dang tall. I used bamboo ribs that didn't flex much. I found out that rattan is the way to go from a certain lamp maker. :wink:

I made another quickie lamp that would work with the hat. This one is going to my brother as well. Now he'll have 4, whereas I still don't have one of my own. One of these days....

Thanks for looking.
Woody


Custom Tapa Swag Lamps and Sconces Built By Kahaka

[ Edited by: Kahaka 2013-12-17 16:57 ]

T
tikiskip posted on 12/18/2013

Love the hat trick on the bottom of this light.
Before people start going "I got one of those lights and mine is made of bamboo"
Your right the old ones are made of bamboo but I think they had good fresh just cut
bamboo, not the old stuff we get here in the states.
Sooo that bamboo would flex more.
But if you use rattan it will flex more and be better for this hat makin project.
That's why I said rattan.
Guess I shoulda told you how to get more of a slope for the rattan sides.
Nice light.

Old Kahiki hat outa bamboo.

New hat made outa rattan made with a method of mine. (I think that Franks cane and rush has photos of how I did it on their website Still)

K
KAHAKA posted on 12/20/2013

I didn't have any references making this hat, other than pics I found of old Orchids' lamps, but I think I've figured out the necessity of an upper ring to give it the bell curve. Learning seems to happen along that same curve.

K
KAHAKA posted on 12/21/2013

And that hat you made is incredibly bitchin there, TikiSkippers.

T
tikiskip posted on 12/22/2013

Thanks KAHAKA,
I did show kinda how that was done here on TC somewhere long ago.
And I did use a upper ring but think that you could get away without one
and still get a curve.
BUT... you need to have that curve in the rattan/Bamboo before you make hat.
Was going to do a how to on the way I bend rattan but
think that has been put off.

"I didn't have any references making this hat, other than pics I found of old Orchids' lamps"

That's how I do it that and getting lucky and buying lots of lights from the Kahiki and
being able to see how they are made.

K
KAHAKA posted on 01/11/2014

Aloha,

Here's the last lamp I completed for 2013. This was a custom order by Forgotten Tikiman. Thanks buddy!

Cheers,
Woody

AF
A Frame posted on 01/11/2014

Nice...an excellent outcome seems to be the norm when you create!

T
TikiPops posted on 01/20/2014

Woody.
Lov'in the resin work. The inlaid lava rock is awesome. I going to have to try playing with resin. Just seems like so many options.

F
foamy posted on 01/20/2014

Woof. Another excellent lamp maker. Very nice work. I gotta drop in more often.

K
KAHAKA posted on 02/06/2014

Thanks A Frame, TikiPops, and foamy!

TikiPops... resin is fun stuff, just messy as hell, expensive, and fumy. It does open up windows of possibilities for lamp making!

I haven't done a thread of a lamp build from start to finish in the ten years I've done this, so here goes.

I'm making a drum style lamp with bamboo sides with a resin, ship wheel style bottom.

I use this goofy caveman "tool" a while back to make my circles. I then divide the circle so that there are 8 spokes leading to the center circle.

After cutting out the windows between the spokes, I line all inner walls with woven edging I get from Benson's Imports.

After cutting down some bamboo into 3/8" trivets, I use 2 part epoxy to glue the pieces into place on a sheet of synskin, before I pour the colored resin over the top.

Next to fill the other windows with shells, and pour the resin...

T
tikiskip posted on 02/07/2014

Lookin good.
Will be cool to see how you make yer lights.
I have been wanting to make a knock off of one of your lights
for myself not for sale.
Never can find the time.
After I did a how to make a basket light on TC I can never find baskets for lights now.
Could be a coincidence.

K
KAHAKA posted on 02/10/2014

We still need to do that trade, TikiSkip!!

BK
Big Kahuna posted on 02/10/2014

Kahaka, you're killing me! Dude, your stuff is amazing! Thanks for the in-progress pics!

K
KAHAKA posted on 02/10/2014

Resin!

I use this wax to dam up the imperfections in the wood so the resin doesn't run all over hell.

Then I use wax paper for the panels and painters tape to prep for the resin. Wax paper pulls off cleanly- doesn't stick to the resin once it hardens.

All the panels taped up.

This is the resin I use... I get it at Tap Plastics.

Poured. Ready to work with in about an hour.

Next up, the sides and bambooing.


Custom Tapa Swag Lamps and Sconces Built By Kahaka

[ Edited by: KAHAKA 2014-02-09 20:03 ]

BK
Big Kahuna posted on 02/10/2014

Great work! Your attention to detail is what makes your lamps so rad!

V
VampiressRN posted on 02/10/2014

One of these days I am going to have to get a Kahaka lamp. Although I was thinking it would go in the Tiki lounge, I lately have been thinking the dining room might be a better fit. Sure I was just going to keep Tiki in one room of my house but I got some creep going on...LOL You do beautiful work.

ATP
Atomic Tiki Punk posted on 02/10/2014

Is that your car key in the resin?
HA! made you look...

T
tikiskip posted on 02/11/2014

On 2014-02-09 19:20, KAHAKA wrote:
We still need to do that trade, TikiSkip!!

Going to sell all Tiki, I'm going Spanish conquistador!!!
Please join me at Spanish conquistador central.
Where oddly enough we will talk about Tiki and bacon.

Jokes aside, I have already got some new tips here.
Great job on this one!
Stuff like this makes TC great.

K
KAHAKA posted on 02/12/2014

I lost all 8 of my keys in the resin on this one!

BigK, thanks man! I'm havin' fun with it.

I've wanted to do this for a while, Skip. Your how-to-threads were/are always fun to watch and inspiring. Glad you've found something useful in this one!

Next steps!

After the bottom is done, I join it to the top circle with four beams. The top piece has an open center to provide access to the bulb.

Then I lay out the synskin I'm going to be cutting out to adhere to the abaca matting I'll be wrapping around the frame. With pencil, I trace the edge of the frame as I roll it to find out how much I'll need, then repeat on the other side, then cut it out. The synskin will defuse the light from the bulb and give the sides the necessary glow.

I like to iron out the abaca matting to get rid of the creases before spray gluing to the abaca.

Synskin adhered to the abaca.

When I moved to the house we're currently in 2 years ago, I was finally able to set up my air compressor in my work space. All previous work spaces were too small to even allow me to use it. Hot dog, I love this thing. I use a pneumatic stapler to staple the matting to the frame. I also recently bought an air nailer, which I used to nail on the bamboos.

Finishing steps up next!

K
KAHAKA posted on 02/12/2014

And I'd be happy to make a lamp for ya, VampiressRN!

T
tikilongbeach posted on 02/12/2014

That looks beautiful! That lamp would really catch a person's eye with all of the details.

M
Murph posted on 02/12/2014

Lovin' the tutorial!

M
Monkeyman posted on 02/13/2014

Inspiring as always.....

H
hiltiki posted on 02/14/2014

Can't get any better.

ATP
Atomic Tiki Punk posted on 02/14/2014

Now your giving away all your secrets, looks great!

K
KAHAKA posted on 02/15/2014

Thanks for the kind words ya'll!

Next up... Edging. I use this woven material found at Oceanic Arts and Benson's.

I iron it flat before hot gluing it on. I iron it again after I've glued it to spread the glue around and to get a tight fight around the bamboo.

K
KAHAKA posted on 02/15/2014

Then I coat the bamboo with a few coats of this matte clear to bring out the color in it and to protect it.

And that's a wrap! Lotsabamboo with the Shipwheel Resin Bottom, headed to Texas.

Mahalo!
Woody

S
SandraDee posted on 02/15/2014

Regardless of the fact that you sign your posts "Woody" I never put it together that you were the same Woody that is Notch's friend until recently.

Yes...I catch on quick!

Awesome lamps as usual. Crazy how much work you put into these things but man does it pay off in the end!

[ Edited by: SandraDee 2014-02-14 18:30 ]

TT
Tiki Tonie posted on 02/15/2014

Wow, they're all so awesome!!!! Do you do any table lamps?

Pages: 1 2 3 4 5 6 7 8 9 10 11 483 replies