Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 2,950 replies
J
JohnnyP
Posted
posted
on
Thu, Jan 4, 2007 10:53 AM
It came in a basket, with a blanket and a note "Please take good care of my baby, you look like a nice caring home!" |
G
GMAN
Posted
posted
on
Thu, Jan 4, 2007 4:16 PM
A.S. and JohnnyP - Naw, it was nothing that easy...but I did get a decent deal on it. The Echo has low hours and some good equipment on it. It should work well for me for my other projects. I've been runnng the RedMax for a while and it will be nice to have a smaller saw to work with. Sam - you bet I'm gonna give 'em hell. Look for me on http://www.chainsawscultptors.com -Gman |
B
Benzart
Posted
posted
on
Thu, Jan 4, 2007 4:48 PM
Nice couple of sawz there GMAN. You might want to loosen the chain tension a bit on the RedMax. I see a bit of blueing on the tip where it is getting too hot.. less tension will slow that down a lot. |
G
GMAN
Posted
posted
on
Thu, Jan 4, 2007 6:17 PM
Heya Benzo, I've got the chain pretty darn loose. It hangs down pretty good when you set it on it's belly. I can almost get three fingers between the bar and chain. I tucked the chain up in the bar for the picture :) . I took your advice and lubed the bar before I installed it, and I ran the chain fairly loose. I only ran it about 20 min and dipped the nose in a can of bar oil every few minutes. Please don't put me in time out....really, it didn't get hot....much! Thanks for the note. I'll be sure to watch what I do with it. There is no damage except for a little lost paint so far...... I'll try not to beat it up the way I do with sprocket tip bars. -Gman "The saw is family" [ Edited by: GMAN 2007-01-04 19:45 ] |
B
Benzart
Posted
posted
on
Fri, Jan 5, 2007 7:05 AM
That Moai looks great in that spot! |
T
Tikisgrl
Posted
posted
on
Fri, Jan 5, 2007 7:26 AM
Hi GMAN, I fixed your link but I can't find your sculptures? Can you point me a little closer? Thanks, Tikisgrl |
G
GMAN
Posted
posted
on
Mon, Jan 8, 2007 4:59 PM
Ahoy! The mailman brought me some more toolz today...Happy Happy, Clunk Clunk! Updates on the Teko to come....in while. -Gman |
B
Benzart
Posted
posted
on
Mon, Jan 8, 2007 5:00 PM
HappyHappyHAPPY!! |
C
congatiki
Posted
posted
on
Mon, Jan 8, 2007 5:34 PM
GMan yer gonna love those big Flexcuts! Now get to work with them...we expect something |
F
finkdaddy
Posted
posted
on
Mon, Jan 8, 2007 6:08 PM
Awsome stuff, Gman, now let's see that Teko! |
T
tikigap
Posted
posted
on
Mon, Jan 8, 2007 7:13 PM
Flexcuts... aaahhhhhhhh! Sweeeeet! |
G
GMAN
Posted
posted
on
Wed, Jan 10, 2007 5:02 AM
Thanks all! The big chisels should be a big help to me in several places that are a down right pain in the a$$ with my other toolz. I also want to use them in some other places to give me a little more freedom. My Teko has been on a bit of a Holiday, hanging out in one of my big freezers with about 100 stinky shark tissue specimens. I took him out of the freezer a day ago and unwrapped him last night, so I should be able to take a few chops at his legs here in the next few days. He looks good with no additional checking. I was a bit concerned about major cracking due to the freezing as this log is only seasoned a year or so. All is well and I should be able to pick up where I left off and move forward quickly now. I have a few choices to make and a few decisions a head of me regarding his feet/moko/finish, but I'm enjoying thinking about my options. It's good to have options! Next carving update = soon! -Gman |
B
Benzart
Posted
posted
on
Wed, Jan 10, 2007 5:17 AM
Well, izzit "Soon" yet? Did you Thaw the Teko yet? Don't dive in with the chisels with him frozen, you Know what will happen. You too, like Buzzy, watch for the "bird beaks" on the V-toolz, I think you are familiar with them? |
G
GMAN
Posted
posted
on
Wed, Jan 10, 2007 5:55 AM
Yeah Benz, I had a run in with a Felxcut bird beak about a year ago. You wouldn't think that decent toolz would leave the factory with that type of imperfection....but they do. Maybe we should send them a form letter...one from each of us? This new set I have here looks good to go. That was the first thing I looked at on the v-liner. Thanks for the reminder. -Gman |
J
JohnnyP
Posted
posted
on
Wed, Jan 10, 2007 6:27 PM
You can carve frozen wood, we do it all the time up here. Don't have much of a choice. My Flexcuts had the same birds beaks. Thanks for the advice to get rid of them before carving. So, you've had these carving bars for a while. I think you're holding out on us. JP |
G
GMAN
Posted
posted
on
Thu, Jan 11, 2007 4:42 AM
:P -Gman |
B
Benzart
Posted
posted
on
Thu, Jan 11, 2007 5:08 AM
I'm lookin for big chips on the floor and I guess you forgot to post that picture and thats the reason I don't see them?? :) |
G
GMAN
Posted
posted
on
Thu, Jan 11, 2007 4:51 PM
No pressure Ben. I'm on it. I have a busy weekend coming up, but I'm off on Holiday Monday so I should be able to swing some time in the shop. Big chips will fly and there will be smiles all around. But first....the boars.....the Silence of the Hams! -Gman |
J
JohnnyP
Posted
posted
on
Fri, Jan 12, 2007 5:26 PM
All right, enough with Ms. Piggy, when are you carving again? JP |
G
GMAN
Posted
posted
on
Sun, Jan 14, 2007 2:06 PM
JohnnyP - I'll be carving tomorrow...after I get a F$#%%^! screw removed from my brand new truck tires. $1,000 bucks in rubber and I pick up a screw the first week out....... -G Dammit |
J
JohnnyP
Posted
posted
on
Sun, Jan 14, 2007 6:40 PM
I feel sorry for your neighbors tomorrow! You are going to be letting out and venting some pent up frustration with a bunch of saws running, and we get to see some nice looking carvings later! :) |
J
JohnnyP
Posted
posted
on
Mon, Jan 15, 2007 6:38 AM
You need a rack like this to display your boar's tusks. From JP Meyer Oceanic Art. JP |
G
GMAN
Posted
posted
on
Mon, Jan 15, 2007 2:47 PM
JohnnyP - Thanks for the pic, I would have to smack a few more boars before I could put something like that together. That could take a while..... As for the neighbors listening to the humm of my saws today....nope. One of my neighbors across the way lost his wife the other day and they were having a service today. They had company coming on and out all day and I didn't want to make any noise. So, I spent a few hours in the side yard using some chisels. I didn't do a whole lot, but I did work on his legs, feet, back, and a few other difficult spots. Benzo - Here are a few big chippies for you :D Although I still have a lot to do on him, please welcome the "Barefoot Assassin" to the ohana. I took these while I worked this morning... and I took these after lunch. Thanks for stopping by.... -Gman |
F
finkdaddy
Posted
posted
on
Mon, Jan 15, 2007 2:52 PM
"The Barefoot Assassin", what a great name! He's really coming together nicely. I'm glad to see you getting good use out of those new chisels. I love how the feet are looking so realistic. Don't stop now! |
B
Benzart
Posted
posted
on
Mon, Jan 15, 2007 3:04 PM
Man Lookit you GO! You're gonna wear out those chizzles in a week at this rate, did you buy the extended warranty on them?? Lookin real good and I see you are cleaning out places where you only had fits before, Cool! |
C
congatiki
Posted
posted
on
Mon, Jan 15, 2007 4:06 PM
now we're cooking...GMan back to wood! This looks great my friend...the body flow is really |
H
hewey
Posted
posted
on
Mon, Jan 15, 2007 6:09 PM
Coming along nicely :) |
M
McTiki
Posted
posted
on
Tue, Jan 16, 2007 3:26 AM
G! This guy is rock'n ! finish him up and send him over here ASAP! I'm diggin the toes! Mahalo McTiki |
B
benella
Posted
posted
on
Tue, Jan 16, 2007 7:28 AM
Very nice details. Benjamin. |
H
Heath
Posted
posted
on
Tue, Jan 16, 2007 7:34 AM
Excellent work Gman! I'm really enjoying watching this guy come to life. |
J
JohnnyP
Posted
posted
on
Tue, Jan 16, 2007 6:30 PM
I thought this was a family site? You are gettin' wicked with the chisels. This could be your best piece yet. Thanks for all the pictures, it took a while on dial up, but worth every second. JP |
G
GMAN
Posted
posted
on
Fri, Jan 19, 2007 5:08 PM
Finky - These feetz were made for sneakin'....sneakin' around to git you! The new gouges are pretty nice. My others are a fair amount smaller, so these will come in handy on the big stuff. Benz - Yup, I got the 3 year 30,000 mile warranty on them Flexcuts. I imagine they will get a lotta use round here. Conga - Now we're cooking with Crisco! I'm glad you like his toez! I figured you could appreciate them! Hewey - Thanks! McTiki - Sure, shoot me your address and I'll send him right on over. Careful though, he's a biter.... benella - Yepper, he's made from cedar. Heath - I'm glad you are enjoying watching the progress. Stand by, as I have lots more to do. JohnnyP - You need a high-speed connection mate! |
S
surfintiki
Posted
posted
on
Fri, Jan 19, 2007 7:51 PM
Dang! He looks intimidating! No..wait, that's the dog in the background. Oh but he is too. |
G
GMAN
Posted
posted
on
Tue, Jan 23, 2007 4:22 PM
Thanks Surfin....but my dog Earnie is a sweetie, and is not very scary at all. He's a lover not a fighter. Yep, you are correct, we are having super carving weather down here. It's the best time of the year. C'mon down! No updates for the Tekoteko, but I have been working on some other projects. I'm waiting on news from two projects using my art, but but being worked by other artists. And, I'm working on relaunching my website and extending the focus from just my gyotaku to including all types of my Oceanic Arts. -Gman |
B
Benzart
Posted
posted
on
Tue, Jan 23, 2007 7:14 PM
Gee, Man, Where you been. Been Mising you 'round here! |
J
JohnnyP
Posted
posted
on
Wed, Jan 24, 2007 6:15 PM
It is too darn quite in this thread. Hello, Hello ........... echo .......... olleH ,olleH [ Edited by: JohnnyP 2007-01-24 18:16 ] |
G
GMAN
Posted
posted
on
Thu, Jan 25, 2007 5:10 PM
Benzo and JohnnyP - I'm here, just laying low. I'm working on some other stuff. I'll be back to working on my tiki stuff soon. -Gman |
B
Benzart
Posted
posted
on
Thu, Jan 25, 2007 5:15 PM
'S OK |
T
Tamapoutini
Posted
posted
on
Thu, Jan 25, 2007 8:39 PM
You're not giving all the G-love to that OTHER site are you..? :lol: :wink: |
J
JohnnyP
Posted
posted
on
Fri, Jan 26, 2007 1:06 PM
Checked him out over there and he isn't there either. Gman is MIA. |
B
Benzart
Posted
posted
on
Fri, Jan 26, 2007 6:53 PM
We'll have to check him out and see who he is two-timing with. If he smells like barbequed pig, we know he's been dancing with the Up-Country Pigs (again don't ask) If he has sand in his shoes, then he has been out in the dunes racing his Sand-Rail (You can ask, But we Won't tell! Ofcourse, If he had sawdust everywhere we would probably be seeing pictures SO, we can count that one out. |
H
hewey
Posted
posted
on
Fri, Jan 26, 2007 11:04 PM
Maybe he's just bludging! :) :) :) Come on man, TIKIS! |
G
GMAN
Posted
posted
on
Sat, Jan 27, 2007 8:43 AM
|
F
finkdaddy
Posted
posted
on
Sat, Jan 27, 2007 8:47 AM
I can't wait to visit. You know I'm gonna have me some o' dat pork! |
G
GMAN
Posted
posted
on
Sun, Jan 28, 2007 12:44 PM
Finky - I'll have plenty of BBQ whenever you make it. :D All - Life has been in the way lately and I have not been able to get any tiki carving time in. I threw my back out yesterday and couldn't do anything but whimper and eat pills. -Gman "The saw is family" [ Edited by: GMAN 2007-01-31 15:47 ] |
F
finkdaddy
Posted
posted
on
Sun, Jan 28, 2007 1:43 PM
Very nice. It has a very old look to it. Lot's of class. I hope your felling better soon, because I might need someone to help me move dressers. :wink: Just kidding... :lol: I'll take you up on that BBQ offer, I happen to be a terrific cook! Mmmmm, pork. My thoughts were so loud I couldn't hear my mouth... [ Edited by: finkdaddy 2007-01-28 13:59 ] |
H
hewey
Posted
posted
on
Sun, Jan 28, 2007 6:12 PM
Piggies! :) My girlfriend wants to get a pot belly (miniature) pig and call it bacon! Problem is they smart and they like digging so we not getting one in a rental... She's got a pig collection a few hundred strong. So Ive claimed some shelves for tikis, and shes claimed some for piggies... anyway... mate, rest up. Injuring your back isnt worth it. That little guy (who isnt so little) is very nice by the way. Dont annoy Gman by the way, I hear his long pork makes a delicous BBQ!! |
C
congatiki
Posted
posted
on
Sun, Jan 28, 2007 6:43 PM
Hey is this a plot against us tiki guys...I screwed up my back too. Get well GMan...looks |
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 2950 replies